Running constantly, never cold enough
Usually one of three things: a refrigerant leak, a condenser that cannot reject heat, or a door quietly letting warm air in. A dusty condenser behind a fridge pushed into a tight cabinet produces exactly this symptom and costs nothing to fix.
If the condenser is clean and the seals are sound, the next step is pressure testing rather than adding refrigerant and hoping.
Ice where it should not be
Ice on the back wall of a fridge section points at a defrost fault: a failed heater, timer, thermistor or blocked drain. Ice on a freezer evaporator can simply be a door left ajar or a gasket that has lost its magnet.
Left alone, ice insulates the coil, the compressor runs longer, and a cheap fault becomes an expensive one.
Water, clicking and warm spots
Water inside or under a cabinet is almost always a blocked defrost drain or a misaligned drain pan. Clicking at short intervals is a start component or protection device doing its job, and it is a warning rather than a nuisance.
Warm at the top and cold at the bottom usually means airflow: an overloaded cabinet, a failed evaporator fan, or stock stacked against the return.
In short
- — Clean the condenser before assuming a sealed-system fault.
- — Ice build-up is a symptom of a control or seal problem.
- — Repeated clicking is protection tripping, not normal operation.
Related services