Start from deliveries, not the floor plan
The useful starting point is how much stock arrives, how often, and how bulky it is. Crates of lettuce and boxes of frozen product occupy very different volumes for the same weight, and a room that fits the shelving plan but not the delivery rhythm is overloaded by Thursday.
Allow working space to move stock, not just to store it. A room packed to the ceiling cools unevenly, the evaporator loses airflow, and the door stays open longer because nobody can get in and out quickly.
Door traffic and kitchen heat
Every time the door opens, the room gains heat and moisture. In a busy café that happens dozens of times a service, so the refrigeration load is driven by traffic as much as by panel area. A strip curtain on a high-traffic room is one of the cheapest improvements available.
Kitchen ambient matters too. A condensing unit rejecting heat into a 35 °C back-of-house corner delivers noticeably less than its rated capacity, which is measured under standard conditions.
Chilled, frozen and the in-between
Chilled rooms at 0 to 4 °C and freezer rooms at −18 to −22 °C are different machines: freezer rooms need floor insulation, heated door frames and a defrost strategy that clears the coil. Treating one as the other is the most common specification error we are called to correct.
Specify the room around the process, then let the equipment follow. The other way around usually ends with a room that is technically working and practically useless at 7pm on a Saturday.
In short
- — Size from delivery volume and working space, not floor area alone.
- — Door traffic and kitchen heat are real loads, not rounding errors.
- — Freezer rooms need different construction and defrost design.