The load is not the floor area
Durbanville summers are dry and bright, and a west-facing living room with a sliding door collects an enormous amount of heat in the late afternoon. A unit sized from a square-metre rule of thumb is looking at the wrong number: glazing area, orientation, ceiling height, insulation and how many people use the room all move the load.
The practical test is whether the room reaches set point by mid-afternoon on a hot day, not whether the unit blows cold air at 7am. If it only copes in the morning, it is undersized or it is fighting a load nobody calculated.
Dust is a capacity problem
The south-easter that makes summer bearable also lifts dust off building sites and open ground, and a condenser coil matted with it cannot reject heat. Head pressure rises, capacity falls, and the unit runs longer for less cooling.
A clean coil is not cosmetic maintenance. On a dusty position it can be the difference between a system that holds temperature and one that is permanently behind. In the northern suburbs we recommend checking the outdoor coil at least twice through summer.
Before you buy a bigger unit
Measure the room's actual behaviour first: supply and return air temperatures, refrigerant pressures, and whether the outdoor unit has clear airflow. A blocked drain, a failed capacitor or a unit set to fan-only can all mimic an undersized system.
If the diagnosis is genuinely a capacity shortfall, the answer may be a second unit, better shading, or a different format entirely. Adding refrigerant to an undersized system does not add cooling.
In short
- — Size from glazing, aspect and occupancy, not floor area alone.
- — A dusty condenser loses capacity long before it fails.
- — Diagnose before upsizing: some capacity complaints are faults.